Accurate & economical combustion process monitoring
The OxyTrak™ 390 ex-situ flue gas analyzer is ideally suited for measuring unburned oxygen levels in dirty, rugged combustion applications. A diffusion convection loop design provides high levels of accuracy with minimal service or maintenance required.
OxyTrak 390 Ex-Situ Flue Gas O2 Analyzer
Vaisala SPECTRACAP® Oxygen Transmitter OMT355
|
- An optical, diode laser based oxygen analyzer for industrial gas measurements.
- Minimizes need for sample conditioning equipment.
- In-situ probe or sampling cell options.
- Tolerates aggressive chemicals.
- Tolerates excessive amounts of moisture even in liquid form.
- Low maintenance.
- Diagnostic output for preventive maintenance.
- Heated optical surfaces to prevent condensation
Technical Specifications Performance
Measurement range 0 ... 100 % O2 Accuracy (including noise,
linearity, and repeatability)
±0.2 % O2 Temperature dependence
over T range
±2 % of reading Stability ±1 % of reading/year Zero drift ±0.1 % O2/year Response time of
measurement
3 s Diffusion limited response in
still air
T63/T90 without filters 10 s / 20 s with stainless steel mesh filter 10 s / 25 s with stainless steel mesh and PTFE filters
30 s / 70 sOperating environment
Operating temperature range for probe (in-line installation) -20 ... +80 °C for electronics (housing) -40 ... +60 °C for transmitter
(ambient gas measurement)
-20 ... +60 °C Operating pressure range 0.8 ... 1.4 bar Maximum pressure range for
probeup to 10 bar Inputs and outputs
Power supply 11 … 36 VDC input range Power consumption maximum 6 W typical 3 W Analog output 0/4 … 20 mA, sourcing maximum load 500 Ω Serial output
(2-wire non-isolated)
RS-485 Alarm/control relay 30 VAC/60 VDC Mechanics
Housing material G-AlSi10 Mg (DIN 1725) Probe material AISI 316 Housing classification IP66 Weight 2.2 kg Mounting flance diameter
Can be fitted to standard
flanges. Minimum sizes:
DIN (2527B) DN50 and
(150) 2.5"96 mm Cable bushing Stainless steel mesh filter Cable gland M20 x 1.5
openings Ø 310 μm Wetted materials
AISI 316, EPDM or Kalrez®
(optional), PTFE (optional), SiN, MgF2
Flue Gas Analysis
Flue Gas Analysis Overview Our zirconium oxide analyzers for flue gas analysis and combustion control serve applications from low to high temperatures and from clean fuels to ones producing high particulate levels. |
Labels: Flue Gas Analysis
APX Advanced Paramagnetic Analyzer
The APX advanced paramagnetic oxygen analyzer combines the benefits of the GE Panametrics XMO2 and TMO2 thermoparamagnetic transmitters with advanced background compensation features that allow the analyzer to operate in applications with widely varying, defined or undefined hydrocarbon background gases. This makes the APX an ideal choice for applications such as barge loading, flare gas, vapor recovery, refinery gas and tanker off-loading. |
Subscribe to:
Posts (Atom)